Grill lighting instruction – Permasteel PG-50410SRLB User Manual
Page 25
22
GRILL LIGHTING INSTRUCTION
TO LIGHT THE ROTISSERIE BURNER WITH MATCH:
1) Read instructions before lighting.
2) Open the lid during lighting.
3) Push and turn the rotisserie burner knobs slowly to “ HI ” position, then release.
4) Push down the safety valve switch button with right hand and hold on, light by
match with left hand. Make sure the burner lights and stays lit.
TO LIGHT THE SEARING BURNER OF THE GRILL:
1) Read instructions before lighting.
2) Turn all knobs to “ OFF ” then open the tank valve. Always keep your face and
body as far from the grill as possible when lighting.
3) Open lid during lighting.
4) Push and turn searing burner knob slowly to “ HI ” position with left hand 2
seconds later. The built-in igniter will click and spark simultaneously to light the
burner once burner lights. Turn the control knob to “ OFF ” and release the
button IMMEDIATELY if the burner does not light within 5 seconds. Wait 5
minutes for gas to dispel, then repeat the lighting procedure.
5) Follow match lighting instruction if burner can’t be lit after repeating 3-4 times.
TO LIGHT THE SEARING BURNER WITH MATCH:
1) Read instructions before lighting.
2) Open the lid during lighting.
3) Push and turn the searing burner knobs slowly to “ HI ” position, then release.
4) Light by match. Make sure the burner lights and stays lit.