D-Link DI-804V - Manual (Page 25)

25
Modem String Settings
Modem string settings allow user to input detail settings for the analog
modem. If you would like to change the baud rate settings, please check the
initial string. (You can refer to the manual for your modem.)
Administration Settings
PASSWORD SETTINGS
You can give your VPN Gateway a new password. This password will be
required the next time you configure your VPN Gateway. To enter a
password, type your password in the new password field and type it again in
the retype password field.
Note: it is important to remember your password. If for any reason you lose
or forget your password, press the small reset button located on the back of
the device for 5 to 6 seconds. Reset action will re-initialize the settings. All
configurations, including password, will be reset and require re-entering.