Pacific Cycles IF MODE maintenance - Manual (Page 6)

7. After disassembling the brake, loosen the 3
screws on the hub first, then loosen the 6
black screws and remove the disc.
8. To remove the hub (if necessary), use the
hex wrench shown above to loosen and
remove the hub from the fork.
Restoring the front wheel:
Note the 3 screws on the hub (right picture) match the holes on the wheel side when assembling the
wheel back.
Rear wheel exploded illustration:
Note: The steps of disassembling rear wheel is basically same as front wheel, the
rear wheel has more sub-assembly parts.