OWON HDS Series - Manual (Page 53)

OWON HDS Series Handheld DSO & DMM 8-Advanced Function of Oscilloscope
new waveforms captured.
Single shot mode: In this mode, the oscilloscope will detect a trigger and capture a waveform at
each time when the customer presses the RUN/STOP key.
Holdoff: Set time slot before another trigger event.
8.6 Acquiring Mode Setting
The Acquiring Mode menu is described in the list shown as below.
Function menu Settings Description
Sample Normal sampling mode.
Peak Detect Use to capture maximal and minimal samples. Finding
highest and lowest points over adjacent interveals.
Average Use to reduce random noises, four options are available
as followed.
Averages 4, 16, 64
or 128
Four options, indicating the number of averages.
8.7 Display Setting
The Display Setting menu is described in the following table.
Function menu Settings Description
Type
Vectors
Dots The adjacent sampling points are joined by vector form.
Only displaying sampling points captured..
Persist
OFF
1s
2s
5s
Infinite
Options for setting the persistence time for each
sampling point.
Format
YT
XY Show waveform as voltage against time.
Show waveform as CH1(X) against CH2(Y)
Carry
Bitmap
Vectors Transmit data in bitmap.
Transmit data in vector.
8.7.1 Display Style
The display style includes Vector and Dot displays, shown as the following figure 46, figure 47.
４５