OWON HDS Series - Manual (Page 22)

OWON HDS Series Handheld DSO & DMM 6-Using the Scope
figure 7: Voltage Unit Scale of Channel 2
4. Press the OSC ▲ or OSC ▼ key to adjust the vertical scale of Channel 2 and press the
OSC◄ or OSC ► key to adjust the horizontal time scale.
5. Press the OSC OPTION key one more time, and the following display is visible at the
bottom left side of the screen, shown as the following figure.
◄/► – Time
▲/▼– CH1 Zero
See the following figure 8:
figure 8: Zero Point Position of Channel 1
6. Press OSC ▲ or OSC ▼ key to adjust the zero position of Channel 1 in vertical direction
and press OSC ◄ or OSC ► key to adjust the horizontal position.
7. Again, press OSC OPTION key and the following appears at the bottom left side of the
screen, shown as the following figure.
14