Orion System Modular Service Tool SD - Manual (Page 2)

SD CARD UPDATING INSTRUCTIONS
Your Modular Service Tool comes with an SD memory card that contains
the software to communicate to the various controllers. This SD card can
be removed and easily updated through a computer by downloading
updates, as they become available, from our website to your computer.
In order to perform any updates, your computer needs an SD card drive or
you will need to purchase an SD card adapter.
Download instructions are found in Appendix B of this manual.
WattMaster Controls, Inc.
8500 NW River Park Drive · Parkville, MO 64152
Toll Free Phone: 866-918-1100
PH: (816) 505-1100 · FAX: (816) 505-1101
E-mail: [email protected]
Visit our website at www.orioncontrols.com AAON ® is a registered trademark of AAON, Inc., Tulsa, OK.
WattMaster Controls, Inc. assumes no responsibility for errors
or omissions.
This document is subject to change without notice.
Form: OR-QSOISD-TGD-01F
Copyright May 2015 WattMaster Controls, Inc.
www.orioncontrols.com
IMPORTANT NOTICE
This Quick Start guide provides instructions for operating the Modular
Service Tool SD.
The Modular Service Tool SD Operator Interface Guide for each controller
is available for download from our website at orioncontrols.com or if you
have the Modular Service Tool SD Card available, the technical guides can
also be printed from the SD card.
VCC-X Controller - OR-VCCXOISD-TGD
VCM-X & VCM-X E-BUS Controllers - OR-VCMXRNEOISD-TGD
RNE Controller - OR-VCMXRNEOISD-TGD
SA E-BUS Controller - AA-SAOISD-TGD
VCB-X Controller - OR-VCBXOISD-TGD
VCM Controller - OR-VCMOISD-TGD
VAV/CAV and MUA II Controllers - OR-VAVCAVMUAOISD-TGD