Orion System Modular Service Tool SD - Manual (Page 16)

APPENDIX B - UPDATING THE SD CARD
Modular Service Tool SD
16
Updating The SD Memory Card
You may need to update the SD memory card from time to time,
either for a new release or to add data for another Controller.
NOTE:
Some older controllers might require updating the soft-
ware in the Service Tool itself. Contact Tech Support for
further information.
Follow the instructions below to download the update fi le from
our tech support web page:
1. Insert the SD memory card in your computer’s SD drive
and open the drive’s window.
2. Open your browser and type in the address:
http://wattmaster.com/techsupport.
3. On the Tech Support web page, locate the fi le
Modular_HH_Screens.zip and double-click your mouse
on it.
4. Click when asked to save or open the fi le
and then click . This option will save the fi le to the
“Downloads” folder on your PC.
5. Open the “Downloads” folder in Windows Explorer.
You will fi nd a folder labeled, “Modular_HH_Screens.
zip.” Right-click on this folder and choose “Extract All”
from the options list. NOTE: Any compression software
can be used to extract the zip folder’s contents, for
example, Winzip.
6. Once you unzip the fi le, you will see a window similar
to the one below.
7. Press to highlight the folders in the
window—App, Manuals & Scr. Press to
copy the folders.
8. Paste the folders into the SD memory card drive’s
window by pressing .
9. Remove the SD Memory Card from your computer and
reinsert it in the Modular Hand Held Service Tool.
SD Memory Card Update