Rain.gauge lw301 getting.started, Set.up.remote.wind.sensor lw301 – Oregon LW301 User Manual
Page 5
E
N
5
OUTDOOR.TEMPERATURE./.HUMIDITy.SENSOR
LW301/302
RAIN.GAUGE
LW301
GETTING.STARTED
The provided sensors are battery operated. Each is capable
of transmitting data to the weather sensor receiver wirelessly
within an approximate operating range of 00 meters (328 feet).
.NOTE.
• Use disposable alkaline batteries for longer usage
and consumer grade lithium batteries in temperatures
below freezing. Do not use rechargeable batteries.
•
Batteries should not be exposed to excessive heat
such as sunshine or fire.
SET.UP.REMOTE.WIND.SENSOR
LW301
The wind sensor takes wind speed and direction readings.
To.insert.batteries:
1
2
.
Unscrew the anemometer from the wind sensor carefully.
2. Insert batteries matching the polarities (+ / -) and replace the
anemometer. Press RESET after each battery change.
6
3
4
5
C
F
2
1
6
3
4
5
C
F
2
1
. LCD screen
2. LED status indicator
3. RESET hole
4. °C./.°F:
select temperature unit
5. CHANNEL switch
6. Battery compartment
1
2
3
4
5
. Rain gauge
2. Battery compartment
3. RESET
4. Funnel
5. Balance indicator
LW301_UM_EN_R8.indd 5
2012/8/14 3:06:13 PM