Olson Technology OT-1000-HH Rev.X2 - Manual (Page 5)

025-010573 Rev. X2 - 5 - www.olsontech.com
For details on operating the OT-1000-HH via a NEC, please refer to the NEC operating manual.
STATUS MENU
The picture below shows the status menu of the OT-1000-HH.
Figure 2 — Status Menu
The actual status of the transmitter is shown using a mark and a description. There are several marks,
filled or unfilled, used to show all events.
 A green flag indicates that the transmitter is working properly.
 An orange (yellow) flag shows a warning. A certain parameter is out of the nominal range.
The unit should be checked and the problem resolved as soon as possible.
 Red flags indicate urgent alarms. An immediate action is required to fix the failure.
 An exclamation mark provides a message about a certain mode of operation or change