Olson Technology OT-1000-HH Rev.X2 - Manual (Page 24)

025-010573 Rev. X2 - 24 - www.olsontech.com
SOFTWARE UPDATE
The devices update menu allows uploading new application software to all devices, which are connected
to the OT-NEC-A (server). The picture below shows the devices update screen.
Figure 24 — Devices Update Screen
The Model OT-1000-HH is shown, together with the serial number of all devices and the current appli-
cation software release of these devices. If a “devices.dat” file is selected by using the Windows
TM
file
selection feature, the available update-release numbers will be shown in the rightmost column. By se-
lecting the OT-1000-HH to be updated, the software update can be started by clicking on the upload se-
lected file button. After a successful update, the new upgraded software release number will be shown
for the updated transmitter.
ORDERING INFORMATION
Part Number Description Notes
10-HHxx-yy-A
LaserLite Tx, 5-10MHz, DWDM, 75
Ohms, SC/APC, AC Power
1) The “xx” in the part number indicates the ITU channel See Olson
Technology System Solution, “DWDM ITU Wavelengths” for channels.
2) The “yy” in the part number indicates the optical output power in dBm.
Range is +3 to +15dBm.
10-HHxx-yy-D
LaserLite Tx, 5-10MHz, DWDM, 75
Ohms, SC/APC, DC Power
1) The “xx” in the part number indicates the ITU channel See Olson
Technology System Solution, “DWDM ITU Wavelengths” for channels.
2) The “yy” in the part number indicates the optical output power in dBm.
Range is +3 to +15dBm.