Olson Technology OT-1000-HH Rev.X2 - Manual (Page 16)

025-010573 Rev. X2 - 16 - www.olsontech.com
Setting the OMI of the Pilot Tone
The OT-1000-HH provides a pilot tone that can be used with return path receivers. This pilot tone en-
ables a pilot tone controlled automatic level control (ALC) of the return path receiver. The picture below
shows how to set the pilot tone OMI. The nominal OMI (0dB setting) is 5%.
Figure 14 — Setting the OMI of the Pilot Tone
Note: Changing the pilot tone OMI immediately changes the output level of a return path receiver with
turned-on pilot tone controlled ALC.