Denon DRA-397 - Manual (Page 16)

Operation Operation
13
ENGLISH
Use FUNCTION to select “TUNER” or press [TUNER] .
Auto tuning
Manual tuning
Press MODE to set the auto tuning mode.
• The “AUTO” indicator lights.
Press TUNING .
• Automatic searching begins.
• If tuning does not stop at the desired station, use to the “Manual
tuning” operation.
• “AM” or “FM” can be selected directly by pressing [FM/AM].
Use FUNCTION to select “TUNER” or press [TUNER] .
Press MODE to set the manual tuning mode.
Check that the display’s “AUTO” indicator turns off.
Press BAND to select “AM” or “FM”.
Press BAND to select “AM” or “FM”.
Press TUNING .
The frequency changes continuously when the button is held in.
1
2
3
4
1
2
3
4
• When the manual tuning mode is set, FM stereo broadcasts are
received in monaural and the “STEREO” indicator turns off.
• “AM” or “FM” can be selected directly by pressing [FM/AM].
About the button names in this explanation
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
STATUS
[FM/AM]
SHIFT [CHANNEL]
[D H F G]
FUNCTION
XM RADIO
TUNING
MEMORY
[TUNER]
MODE
BAND
[MEMORY BLOCK]
FUNCTION
[NUMBER]
(0 ~ 9, +10)
FUNCTION MODE
STATUS BAND SHIFT
MEMORY
TUNING XM RADIO
ENGLISH
Use the “Auto tuning” or “Manual tuning” operation
to tune in the station to be preset in the memory.
Press MEMORY .
Press , [CHANNEL] or [NUMBER] to select
the desired preset channel (1 to 8).
Preset memory
Press [MEMORY BLOCK] ( A to G ) or SHIFT to select
the desired memory block (A to G).
Press MEMORY again.
• Store the station in the preset memory.
1
2
3
4
5
• To preset other channels, repeat steps 2 to 4.
A total of 56 broadcast stations can be preset — 8 stations (channels
1 to 8) in each of blocks A to G.
Recalling preset stations
Press [MEMORY BLOCK] ( A to G ) or SHIFT to select
the memory block.
Press , [CHANNEL] or [NUMBER] to select
the desired preset channel.
1
2