Dolby Laboratories DVD/VCR Combo - Manual (Page 58)

- 58 -
Special Functions
Recorded Section Auto Repeat
Set the AUTO REPEAT mode to ON on the SET UP selection screen. (See Mode Selection.) If the recorded portion
has finished and a non-recorded portion has continued for 15 seconds, the tape will automatically stop, rewind to
the beginning and repeat playback. (The AUTO REPEAT mode is preset to OFF at the factory).
Notes:
• The ON/OFF status of the Recorded Section Auto Repeat can be checked when the DISPLAY button is pressed
to display OSD.
(The “
“ mark lights when the Recorded Section Auto Repeat is on.)
• If the Recorded Section Auto Repeat is on and the tape is rewinded to the beginning with rewind or reverse video
search, the tape will automatically start playback.
Instant Replay
With this feature, you can set a reverse video search time to approx. 20, 40, 60 or 80 seconds of recorded material.
After searching, normal playback will resume automatically.
• Press the PREV
button on the remote control during playback (ex. during commercials).
Number of Times Pressed
Video Search Time
1 Time 2 Times 3 Times 4 Times
Approx. 30 sec. Approx. 60 sec. Approx. 90 sec. Approx. 120 sec.
Number of Times Pressed
Video Search Time
1 Time 2 Times 3 Times 4 Times
Approx. 20 sec. Approx. 40 sec. Approx. 60 sec. Approx. 80 sec.
Skip Search
With this feature, you can set a forward video search time to approx. 30, 50, 90 or 120 seconds of recorded material.
After searching, normal playback will resume automatically.
• Press the NEXT
button on the remote control during playback (ex. during commercials).
Auto Enhance
1. Press the DISPLAY button twice. “ AUTO ENHANCE ON (or OFF)” will appear on the TV screen for a few second.
2. Press the SET button on the unit. Each time the button is pressed, the mode switches between ON and OFF.
(The AUTO ENHANCE is preset to ON at the factory.)
ON:
Normally leave the mode set to ON. This high picture quality function will create a clearer image during playback.
OFF:
Set to OFF when playing back a tape on the VCR while editing or when strong noise appears on the screen.