Dolby Laboratories DVD/VCR Combo - Manual (Page 12)

- 12 -
Connections
(continued to next page) (continued to next page) (continued to next page) (continued to next page) (continued to next page)
Cable TV Connections
Your VCR is capable of receiving the following non-scrambled channels.
• Scrambled channels can be received with the cable box supplied by your cable TV company.
Preparation
Set the 3 4 Output Channel of the VCR to 3 or 4.
See Setting the 3 4 Output Channel.
First check your TV/CATV system
Step 1: Is your TV cable compatible with the VCR?
• YES Go to Step 2
• NO Go to Step 3
Step 2: Does your CATV system have some or all channels scrambled?
• YES Go to
• NO Go to
Step 3: Does your CATV system have some or all channels scrambled?
• YES Go to
• NO Go to Step 4
Step 4: Choose the type below.
• Basic connection (only for descrambled CATV signals.) Go to - or
• To watch a CATV programme while recording a TV programme by using the A/B switch. Go to
A. Connection without a cable box
Connect as shown. Then plug in the power cords of the TV and cable box.
Rear of Unit
From CATV system
IN
OUT
VHF/UHF/
CATV
TV Rear
ANT/CABLE
Coaxial cable (supplied)