Nevion CP-TOUCH - Manual (Page 7)

CP-TOUCH Rev. A
nevion.com | 7
3
Specifications
3.1 Front view
Figure 1: CP-TOUCH front view
3.2 Rear view
Figure 2: CP-TOUCH rear view
3.3 Power connection
CP-TOUCH is delivered with a fixed power supply delivering DC 5VDC to the panel. This
can be fed with 100-240VAC main source. To connect mains to the power supply you need
a mains cord with IEC 320 connector.
Please refer to the latest VikinX Product Catalogue for power supply types, or call Nevion
for this information.
Current draw on by the power supply, without any load on the GPI output, is +5V / 1.0A.
Power
RS-232
Configuration switches Ethernet
GPI Outputs Power supply
GPI Inputs