Nevion CP-TOUCH - Manual (Page 12)

CP-TOUCH Rev. A
nevion.com | 12
4.4 DIP switches on the panel
The dipswitches on the rear of the panel are used to configure panel group.
The Panel Group is selected according to the following table, where OPEN and CLOSED
are described as follows:
0 = OPEN
1 = CLOSED, or ON
Switch # Panel
Group 1 2 3 4 5 6 7 8
0 0 0 0 0 0 0 0 000
0 0 0 0 0 0 0 1 001
0 0 0 0 0 0 1 0 002
0 0 0 0 0 0 1 1 003
0 0 0 0 0 1 0 0 004
0 0 0 0 0 1 0 1 005
0 0 0 0 0 1 1 0 006
0 0 0 0 0 1 1 1 007
0 0 0 0 1 0 0 0 008
: : : : : : : : :
: : : : : : : : :
0 0 1 0 0 0 0 0 032
0 0 1 0 0 0 0 1 033
: : : : : : : : :
: : : : : : : : :
1 1 1 1 1 1 1 0 254
1 1 1 1 1 1 1 1 255