Nevion PGM-HD-2x1-PB - Manual (Page 5)

PGM-HD-2x1-PB Rev. B
nevion.com | 5
2 Specifications
Electrical SDI input
Number of inputs 2
Connectors 75 Ohm BNC
Equalization Automatic;
>300m @270Mbps w/Belden 8281, with BER < 10E-12
>130m @1485Mbps w/Belden 1694A, with BER < 10E-12
Input Return loss
Active input >15dB, 5MHz -1.485GHz
Input Return loss
passive bypass >15dB, 5MHz -742.5MHz
>10dB, 742.5MHz - 1.485GHz
Jitter tolerance SD limit:
10Hz-1kHz: >1 UI
10kHz
– 5MHz: >0.2 UI
HD limit:
10Hz-100kHz: >1 UI
100kHz
–10MHz: >0.2 UI
Electrical Sync input
Connector 75 Ohm BNC
Format Black & Burst, Tri-level
Input Return loss >35dB @ < 10MHz,
30dB @ < 30MHz
Electrical SDI outputs
Number of outputs 4
Connectors 75 Ohm BNC
Return Loss O1, O2
Active output >15dB, 5MHz -1.485GHz
Output Return loss O1, O2
Passive bypass >15dB, 5MHz -742.5MHz
>10dB, 742.5MHz - 1.485GHz
Return loss !O1, !O2 >15dB, 5MHz -742.5MHz
>10dB, 742.5MHz - 1.485GHz
Output signal level 800mV +/- 10%
Output signal rise / fall time
20% - 80% SD limit: [0.4ns – 1.5ns]; <0.5ns rise/fall var.
HD limit: < 270ps, <100ps rise/fall var.
Amplitude overshoot <10%
Output timing jitter SD: <0.2 UI
HD: <1 UI
Output alignment jitter SD: <0.15 UI
HD: <0.2 UI
Supported standards
SD, 270 Mbps SMPTE 259M, SMPTE 272M-AC
HD, 1485 Mbps SMPTE 292M, SMPTE 274M, SMPTE 291M, SMPTE 296M,
SMPTE 299M
Video switch point definition
and sync SMPTE RP168 (tri-level), SMPTE 170m, ITU-R. BT.470
EDH Compliant to SMPTE-RP165
Video Payload Identification SMPTE 352M-2002
Power
Power consumption 3.5W @ 5V
1.2W @ 15V