1 product overview, 1 product description, 1 product versions – Nevion PGM-HD-2x1-PB User Manual
Page 4: 2 key features

PGM-HD-2x1-PB
Rev. B
nevion.com | 4
1 Product overview
Figure 1: Simplified block diagram of the PGM-HD-2X1-PB card
1.1 Product description
The Flashlink PGM-HD-2X1-PB is a 2x1 HD/SD program switch with configurable fade-
in/fade-out and built-in frame synchronizer. Embedded audio is faded in/out with the
video. The frame synchronizer locks an HD-SDI or SD-SDI input to a black & burst or
tri-level signal, and a de-glitcher ensures an always error-free output.
The user parameters of the card can either be changed by switches on the board, or by
the control interface Gyda.
1.1.1 Product versions
At the time of writing this manual, only one version exists, the PGM-HD-2X1-PB.
1.1.2 Key features
Passive bypass from both inputs to non-inverted outputs with less than 25m loss of
cable length (enables full redundancy)
HD/SD video support (will work with DVB-ASI in through mode, but no fading)
De-glitching of input video signal (always seamless output)
Full manual control over selected input or black via GPI inputs or the system
controller Multicon
User selectable generator pattern as fallback for missing signals
HD/ SD frame sync /delay (8 frames max)
Audio delay, enabling Dolby-E processing delay correction
Embedded audio gain adjustment for each video input
Audio fade out/ fade in at switching or frame-wrap
EDH processing