beautypg.com

Communication ports – NavCom SF-2050 Rev.E User Manual

Page 29

background image

SF-2050 User Guide - Rev. E

Communication Ports

Connect the supplied

LEMO

7-Pin end of the NavCom

serial cable (NavCom

P/N

94-310059-3006) to

COM 2

(factory default Control Port) connector of the SF-2050.
Connect the

DB9S

end to your controlling device. Note

that some devices may require an additional adaptor, as
the receiver is configured as a DCE device.

‡

By factory default

COM 2

is the control port for the

SF-2050.

COM 1

can be designated as the control port

by using the appropriate NavCom

proprietary

commands

. NOTE: Some output data types, such as

NMEA messages, cannot output on the Control Port

Figure 8: Communication Port Connections

3-27