NavCom Install Utility Rev.C - Manual (Page 17)

Install Utility User Guide – Rev. C
4-15
Chapter 4 ................................................................ Install Receiver Options
‡
The user may install receiver options via Install Utility or the NavCom program, StarUtil.
Installation via StarUtil is recommended. StarUtil provides a more robust interface. Refer
to the StarUtil User Guide (see Related Documents in the fore-matter).
This chapter provides guidance to install purchased receiver options to the NavCom GPS
receiver via Install Utility:
• Fast Update Rates – Position (10Hz >)
• Fast Update Rates – Raw Data (10Hz >)
• NCT RTK/UltraRTK™ – NCT RTK is for surveys under 10 km. NCT UltraRTK™ is for
surveys from 10 km to 40 km. UltraRTK™ requires GPS software version 4.2 or higher.
• RTK Extend™ – A software option only available in NavCom Technology receivers
that are StarFire™ capable and use the NCT-2100 GPS engine.
• Other features that may become available at future dates
‡
Purchased options are called Receiver Options in Install Utility and Software
Options in StarUtil. The terms are interchangeable.
How to Purchase Receiver (Software) Options
Contact a NavCom authorized representative, or the NavCom Sales Department
([email protected]) to purchase receiver options. The user receives a receiver options
file via email to install purchased options.
‡
The receiver options file is receiver dependant and cannot be uploaded into
multiple receivers. Archive the options file in case a reload is necessary.