Museum Technology Source B-104 BrightSign Button Interface User Manual
Page 3
INPUT - OUTPUT SETTINGS
The supplied program will turn on the button lamp while the video associated with that button is playing, turn-
ing off at the end of the video. To accomplish this, GPIO 0, 1, 2, and 3 are defined as INPUTS, while GPIO
4, 5, 6, and 7 are defined as OUTPUTS. If for any reason it is necessary to change these, it may be done
under
FILE > PRESENTATION PROPERTIES > I/O as illustrated below.
To set the action of the pushbuttons click on the GPIO EVENT icon (see below).
GPIO Event
p3