MultiDyne SilverBack II - Manual (Page 31)

-28-
BASE UNIT
Bi-Directional Digital Video
Format Support: ................................................ SMPTE259M, 292M, 424M, 301M
Data Rate: ........................................................ 19Mbps to 3Gbps
Impedance: ....................................................... 75 Ohms
Signal Level: ..................................................... 800mVp-p, nominal
Inputs (Camera to Base): ................................. 1
Outputs (Base to Camera): ............................... 1
Analog Audio
Outputs (Camera to Base): ................................ 2
Type: ................................................................. Balanced
Impedance: ........................................................ < 50 Ohms
Signal Level: ...................................................... +4 dBu nominal, +24dBu max.
Frequency Response: ....................................... ±0.5dB, 20Hz to 20kHz
PGM Audio / Talent IFB Output
Number of Channels: ........................................ 1
Type: ................................................................ Balanced
Impedance: ....................................................... 20k, 2k, 600 Ohms, selectable
Signal Level: ..................................................... +4 dBu nominal, +24 dBu max.
Frequency Response: ...................................... ±0.5dB, 20Hz to 20kHz
Intercom
Number of Channels: ........................................ 1
Compatibility: .................................................... Clear-Com, RTS
Type: ................................................................ 4-Wire, Balanced
Input Impedance: .............................................. 20k Ohms
Signal Level: ..................................................... +4 dBu nominal, +24 dBu max.
Frequency Response: ...................................... ±0.5dB, 20Hz to 20kHz
Output Impedance: ........................................... < 50 Ohms
Data / Camera Control
Number of Channels: ........................................ 2, bi-directional
Format: .............................................................. RS232/RS422, TTL, selectable
Data Rate: ......................................................... Up to 1Mbps RS422, 115kbps RS232
Connector: ......................................................... DB9-F
Tally and GPIO
Number of Inputs: .............................................. 2
Logic “0” (Off): ................................................... TTL Low or short to GND
Logic “1” (On): ................................................... TTL High or +5V
Data Rate: ......................................................... Can support signals up to 1Mbps
Number of Outputs: ........................................... 2 + Tally
Output Type: ...................................................... Relay Contact, Form C, 30V 2A