MultiDyne SilverBack II - Manual (Page 10)

TALLY AND GPIO
SilverBack II has two integrated Tally LED’s to indicate Tally status, a large bar at the rear of
the unit as well as on the front panel. In addition, a relay contact Tally output provided on the
16-pin LEMO connector labeled AUX.
The AUX connector also provides two GPI’s and two GPO’s for user
well as Timecode input and output.
In addition, the AUX connector has an input to key the headset MIC. A closure to ground
activates this input.
Refer
APPENDIX A for Pin-Out details.
-7-
II has two integrated Tally LED’s to indicate Tally status, a large bar at the rear of
the unit as well as on the front panel. In addition, a relay contact Tally output provided on the
pin LEMO connector labeled AUX.
X connector also provides two GPI’s and two GPO’s for user-defined purposes, as
well as Timecode input and output.
In addition, the AUX connector has an input to key the headset MIC. A closure to ground
Out details.
Figure 7 - Tally
Figure 8 – AUX Connector
II has two integrated Tally LED’s to indicate Tally status, a large bar at the rear of
the unit as well as on the front panel. In addition, a relay contact Tally output provided on the
defined purposes, as
In addition, the AUX connector has an input to key the headset MIC. A closure to ground