How to set up the wemo™app – Mr. Coffee PSTX91WE User Manual
Page 5

8
9
To Restore
Restore Button can be used to reset the memory of the Smart Coffeemaker
and to connect it to a new router. Steps are:
Unplug unit
Press Restore Button
While pressing Restore Button, plug unit back in and keep
Restore Button pressed for 10 seconds
This will cause the unit to reboot and you will need to go through the full setup
again (refer to page 8).
Download the free WeMo™ App from the Apple App store, Google Play or
Amazon App store.
Plug Smart Coffeemaker into electrical outlet.
Confirm your Wi-Fi® router is on.
Make sure your smart device is connected to your home Wi-Fi® network.
A check mark will
appear once you are
successfully connected
to your Smart
Coffeemaker. You can
now exit Settings.
Your Wi-Fi® network will
automatically detect your smart
appliance(s). Select the WeMo™
labeled Wi-Fi® network for your
Smart Coffeemaker.
Open the WeMo™ App. The App
will look for your connected
appliance. When prompted, choose
your home network, and enter the
network password. Your Smart
Coffeemaker will now appear on
the App’s main menu. WeMo™
Remote Control is now enabled.
You will not need to complete
these initial set-up steps again for
your Smart Coffeemaker.
HOW TO SET UP THE WeMo™APP
HOW TO SET UP THE WeMo™APP
1
2
3
4
6
7
8
NOTE: The appliance can still be operated directly from the appliance
control panel in case of a router outage. Any pre-programmed
schedules will still function in case of a router outage.
NOTE: To disable WeMo™ Remote Control, disconnect the
power cord. WeMo™ Remote Control will automatically be
re-enabled when the unit is plugged back in.
Enabled
Disabled
Open your settings
menu and select
‘Wi-Fi® Network.’
5
Make sure your first cup of coffee is as good as can be by cleaning your MR. COFFEE®
Smart Coffeemaker before its first use. Just follow these simple steps:
Wash the decanter, decanter lid and the filter basket in a mixture of mild
detergent and water. Rinse each thoroughly (please refer to the Parts Diagram).
Replace all the parts and attach the water reservoir. Then, run a brew cycle with
water only, without adding coffee and coffee filter.
When brewing is complete, turn your Smart Coffeemaker off, discard the water in the
decanter and rinse the decanter, decanter lid, and filter basket.
Your Smart Coffeemaker is now ready to use. Enjoy it!
NOTE: For regular cleaning and maintenance after the first use,
please go to the CLEANING AND MAINTAINING YOUR
MR. COFFEE® SMART COFFEEMAKER Section.
CLEANING YOUR MR. COFFEE®
SMART COFFEEMAKER BEFORE ITS FIRST USE
1
2
3
1
2
3
BVMC-PSTX91WE_14EM2.indd 8-9
26/08/14 9:16 AM