Datacard Group SP PLUS SERIES SP75 - Manual (Page 10)

Page 10 of 25
Datacard Group Confidential
DATACARD ® DURAGARD ® VIRTUAL EDGE-TO-EDGE LAMINATES
Each SP75 Plus card printer includes either one or two laminators, both capable of running Datacard ®
DuraGard ® Clear or Secure Laminates and Clear or Secure Topcoats. Two laminators allow
customers to use two different laminates or topcoats for added security and/or increased production.
DuraGard Virtual Edge-to-Edge Laminates are larger in size and cover more of the card surface than
laminates designed for use in the Datacard
® Magna™ Class printers and Datacard ® ImageCard ™ IV
card printers.
+ Clear and secure topcoat
+ DuraGard 0.5 mil clear and 0.6 mil secure laminate
+ DuraGard 1.0 mil clear and secure laminate
The SP75 Plus laminator and laminate supply design has allowed Datacard to increase the size of all
DuraGard laminates and improve the consistency in which each laminate is applied to the card. The
result is that all cards laminated on the SP75 Plus card printer include DuraGard Virtual Edge-to-Edge
Laminate which covers over 95% percent of the card surface, increasing the security and durability of
all cards printed and laminated on the SP75 Plus card printer. The laminate edge and the card edge
are virtually the same.
Superior Laminate Patch Coverage:
DuraGard laminates used in the SP75 Plus card printer are larger
than any other CR80/ID1 size laminates
Manufacturer
Printer
Laminate
Height
Laminate
Width
Edge
Margins (Top
and Bottom)
Edge
Margins (Left
and Right)
Datacard Laminates
ImageCard ® Printer Series Laminates
SP75 Plus (virtual edge-to-edge) Laminates
2.00
2.06 3.25
3.31 0.063
0.030 0.060
0.030
95.5% Coverage 50% decrease in edge margin
Fargo Laminates
90.8% Coverage DTC Printers
90.8% Coverage Pro-LX 2.00
2.00 3.25
3.25 0.063
0.063 0.060
0.060
Zebra Laminates
90.4% Coverage P500 & P520
94.5% Coverage P620 & P720
(linerless) 2.00
2.05 3.24
3.30 0.063
0.038 0.065
0.035
MagiCard Laminates
90.8% Coverage Sicura Laminator 2.00 3.25 0.063 0.060
Nisca Laminates
90.8% Coverage PR5101 2.00 3.25 0.063 0.060
JVC
89% Coverage CX710 1.98 3.22 0.073 0.075
All dimensions in inches
Nominal card dimensions are 2.125” by 3.370” (CR80 cards)
All laminates are carrier-based, except P620 and P720, which are linerless laminates
Datacard ImageCard Printer Laminates include the laminates used in the
Datacard ® ImageCard ™ IV printer
Datacard ® ImageCard ™ Magna™ Class printer
Datacard ® Magna™ Class card printer with Advanced Imaging Technology™
Datacard ® Magna™ Platinum™ Series card printer
Dimensional measurements were obtained from competitive websites and the measurement of competitive supplies.