MovinCool Condensate Pump - Manual (Page 8)

PUMP INSTALLATION
HOSE INSTALLATION
Note: The Condensate Pump Kit
is equipped with a 20 foot(6m)
hose. This hose will be used as
both a drain and an inlet hose
for the Condensate Pump.
Cut a section of the 20-foot(6m)
hose sufficient enough (approx. 9
in or 23cm) to connect drain pan
to condensate pump drain hole.
Connect one end of the
section hose to the MovinCool
drain stem.
Insert the other end of the section
hose into the condensate pump
drain hole.
Connect the remainder of the 20-
foot(6m) hose to the drain outlet
spout.
Remove tab from pump.
REMOVE
9"(23cm)
DRAIN HOSE (20' or 6m)
DRAIN
HOSE
(9"or 23cm)
DRAIN HOLE
DRAIN STEM
8