MovinCool Condensate Pump - Manual (Page 3)

FOREWORD
Congratulations on purchasing a MovinCool Condensate Pump.
This manual explains how to install the condensate pump onto
MovinCool units. Please read this installation manual thoroughly to famil-
iarize yourself with the features of the unit and to ensure years of reliable
operation. Y
ou may also find it useful to keep this installation manual on
hand for reference.
Components and/or procedures are subject to change without prior
notice.
Definition of Terms
! WARNING: Describes precautions that should be observed to pre-
vent injury to the user during installation or unit operation.
! CAUTION: Describes precautions that should be observed to prevent
damage to the unit or its components, which may occur during installa-
tion or unit operation if sufficient care is not taken.
Note: Provides additional information that facilitates installation or
unit operation
.
•
Para Español, visita www. movincool.com
• Pour le français voit la www.movincool.com
GENERAL
WARNINGS & CAUTIONS
•
All electrical work, if necessary, should only be performed by quali-
fied electrical personnel. Repair to electrical components by non-cer-
tified technicians may result in personal injury and/or damage to the
unit. All electrical components replaced must be genuine, MovinCool
or DENSO brand purchased from an authorized reseller.
• Do not handle the pump with wet hands or when standing in water
as fatal shock could occur. Disconnect all power from the MovinCool
before servicing the unit for any reason.
• Protect the power cable from coming in contact with sharp objects.
•
Do not kink or allow power cord to come in contact with oil, grease,
chemicals, or hot surfaces.
• T
o reduce risk of electrical shock, connect MovinCool unit to a prop-
erly grounded terminal.
3