Motion Sound SRV-112 - Manual (Page 6)

6
6
- Maintenance-
The rotor, motor, and belt will operate for many hours without adjustment.
• Rotor The rotor spins on sealed ball bearings and requires no oil or any other service.
• Belt The pyrothane elastic belt usually needs no adjustment. Tension can be adjusted by
moving the motor mounting screws. Accessed by removing the front grill cover, do not over
tighten the belt, just enough tension to stop pulley noise or belt slipping.
• Finish The SRV-112 is coated with our tough Polymaric™ polymer finish. Clean as needed
with mild soap and water, do not get water on the grill cloth.
-Service information-
Caution! Hazardous voltages are present inside!
• All warranty service must be pre-approved and performed by Motion Sound or an authorized
service center. Review Motion Sound’s warranty and service policy for details.