Motion Sound SRV-112 - Manual (Page 2)

2
2
SRV-112
The SRV-112 is a rotary speaker cabinet designed to be driven
by any amplifier that can safely drive an 8-ohm load. It is
shipped with an Eminence™ Sreamin’ Eagle speaker.
Maximum power input is 50 watts RMS.
Caution if you are not sure of your amplifiers load
capability, contact it’s manufacturer before
connecting to the SRV-112
-Introduction-
Motion Sound has been successfully manufacturing several types of rotary speakers since 1995.
The SRV-112 is the second generation of guitar rotary speakers. We have incorporated many
suggestions from musicians into the SRV-112 and added our many years of experience into its
features and performance. The SRV-112 defines the guitar rotary speaker standard.
-Warning-
-The SRV-112 can produce high sound pressure levels, hearing protection is advised!-
-The SRV-112 must be earthed and connected to correct power for safe operation-
-Specifications-
• Input connector ¼” speaker input jack on rear panel. (Ground isolated)
• Input impedance 8 ohms (with supplied speakers).
• Power level
Up to 50 watts RMS (with supplied speakers).
• Speaker
One Eminence™ 8 ohm screamin’ Eagle.
• Fuse
Located in AC inlet module.
Power
Voltage Frequency Watts Fuse (slo-blow)
USA 117 VAC 60 Hz 50 1 Amp
Europe 220-240 VAC 50 Hz 50 .5 Amp
Australia 220-240 VAC 50 Hz 50 .5 Amp
Japan 100 Vac 60 Hz 50 1 Amp
• Finish Two part polymaric™ on MDF (Proprietary Polymer)
• Dimensions
24.5” H 20” W 17” D 64 Lbs.