Motion Sound SL-200S - Manual

www.motion-sound.com
SL-200S SLAVE STEREO AMPLIFER
ScalablE !
Amplification for KP-
200S Stereo amplifiers.
The Motion Sound SL-200S is designed to work seamlessly with a KP-200S stereo
amplifier and will add a significant increase in volume (6 db) to a single KP-200S. Need
More? You can daisy chain up to 10 SL-200S slaves to a KP-200S for a total of 22 10”
speakers, 22 ferro cooled horns, (including the KP-200S) and 1200 watts of stereo
power. Play a smaller venue? Take just the amount of power needed.
- Warning-
The SL-200S can produce high sound pressure levels, hearing protection is advised.
The SL-200S must be Earthed and connected to appropriate power for safe operation.
Input Design
Must be used with a Motion Sound KP-200S amplifier only.
Power Amplifier
100 watts/channel (200 watts total)
Speakers
Two 10” Eminence™ Beta™ 250 watt 8 Ohms.
Horns
Two ferro cooled 3.5” 80 watt dynamic, 8 Ohms.
Frequency Response
70 Hz – 17 Khz
Crossover 3 Khz
Power
Voltage Frequency Watts Fuse(Slo-Blo)
USA 117VAC 60 Hz 400 5 amp
Europe/Australia 220-240VAC 50/60 Hz 400 2.5 amp
Japan 100 VAC 50/60 Hz 400 5 amp
Fuse Located in AC inlet module (Use correct values only)