Motion Sound KP-500SN - Manual (Page 3)

3
-INTRODUCTION-
The Motion Sound KeyPro KP-500SN stereo hi-fidelity amplifier provides premium sound quality
and portability for professional and amateur musicians alike. The encompassing three-dimensional
stereo sound is a true compliment to modern keyboard synthesizers, digital pianos, sound modules,
guitar synthesizers and any application that can benefit from stereo sound.
Although operation may seem intuitive, we suggest that you read this manual for helpful tips and/or
details about controls and operation of the KP-500SN in various venues and environments.
-SPECIFICATIONS-
Input Design Range – 300 mV RMS, 2.5 v RMS max
Input Impedance – 100K
Power Amplifier – 250-watts/channel (500-watts total)
Speakers – Two 12” Eminence Deltalite 250-watts, 8 ohms
Horns – Four 80-watt 3.5X3.5 Ferro cooled dynamic, 8 ohms
Frequency Response – 45-17 kHz
Horn Crossover – 3 kHz
Power
Voltage Frequency Fuse (slo-blo)
US 120 VAC 50/60 Hz 8 amp
Europe 230 VAC 50/60 Hz 4 amp
Japan 100 VAC 50/60 Hz 8 amp
Fuse – Located in the AC inlet module (Replace with correct value only)
Finish- Two-part Polymaric
™ polymer finish.
Poplar wood cabinet tough, light weight construction
Dimensions – H 18 1/2”, W 26 1/4”, D 17” Weight 48 lbs.
-Quick Start Setup-
After powering on and connecting your signal source:
1. Set all controls to “5”
2. Master volume – quiet room 3-5, loud band 7-10
3. Master low bass to “5”