Monster HTUPS 2700 - Manual (Page 22)

15
TROUbleSHOOTInG
Symptom Possible Cause Remedy
Component is
not receiving power . The component is plugged into a switched outlet
and the HTUPS has not been turned On . • Turn the HTUPS On.
• Or, plug the component into
an Unswitched outlet .
The HTUPS is plugged into a Switched outlet,
but power on the component is not On .
In some instances, a component plugged
into a switched outlet won’t receive power
when the HTUPS is turned On unless
the component power is also switched On . • Turn the component power On.
Speakers emit
a humming or
buzzing noise . The HTUPS is sharing AC power with equipment
that is not properly grounded . • Connect your HTUPS
to a dedicated outlet .
• Try unplugging different components
from the HTUPS one at a time
to see if the noise stops . If a component
is discovered to be improperly
grounded, attach a copper wire
from the component’s chassis
to the HTUPS’s grounding post .