6 emergency stop, 7 air bleeding, Operation – MMD Equipment 25S-3A3 User Manual
Page 42
5. Operation
5-12
5.6 Emergency Stop
The Emergency Stop button should be used only for emergency stop.
Regularly check the operating performance.
If it is necessary to stop the generator for
emergency, press the Emergency Stop button
.
To reset the button, turn the button head in the
direction of the arrow. If it is not reset, the
machine cannot restart to operate
.
5.7 Air Bleeding
To restart the engine after it runs out of fuel, perform starting operation with the starter
switch positioned at “MANUAL” operation position. After the trapped air in the fuel piping
is bled, the engine starts. If it does not start, repeat this operation about one minute later.
A010131