2 caution during operation, Safety – MMD Equipment 25S-3A3 User Manual
Page 10
1.Safety
1-7
1.2 Caution during Operation
Never touch the output terminals during operation.
Pay attention that high voltage is present at the output
terminals.
When removing or connecting a "load" cable, be sure to
switch OFF the circuit breaker. Turn off the machine,
remove the starter key from the starter switch, then change
cables. The operator must hold the key during cable
changing.
Neglecting the cautions mentioned above, and a third party
starting the machine during operation may cause serious
accidents such as electric shock.
Never touch the interior of the control panel during
operation.
Pay attention that high voltage is present at interior of the
control panel.
Authorized personal only to open control panel.
Keep hands clear from the rotating portion or belts while
running. It could cause serious injuries if hands should be
caught.
Never put your hand near the engine cooling fan during
operation. It could cause serious injury if a hand should be
caught.
Never touch the interior of control panel
H990208
Hands off from rotating parts and belts
TR0304
Beware of cooling fan
W009
Keep away from output terminals
H990208