MK Products Cobra System III Gooseneck - Manual (Page 8)

Cobra Gooseneck Owner's Manual - 8/96 Page 3
TORCH LINERS
BARREL LINER MATERIAL WIRE TYPE USED PART NO.
Straight* Green Teflon All 615-0316
Curved & Long Straight Green Teflon Aluminum 615-0317
Curved & Long Straight Spiral Steel Steel / Cored 615-0318
Spool Kit liner Black Teflon All 615-0319
Straight HD White Teflon All (.045max.) 615-0325
Curved & Long Straight HD White Teflon Aluminum (3/64max.) 615-0326
*Standard - Furnished with torch
Bulk green teflon liner material P/N 615-0054 - Bulk HD white teflon liner material (.023-.045) P/N 615-0209 - Order bulk material by
the foot.
OPTIONAL KITS
Insulated Knurled Drive Roll Kit ............................................................................................ 005-0118
For .030" through 1/16" dia. wire. Includes insulated drive roll P/N 511-0068 and
idler roll assy. P/N 511-0074.
Insulated Groove Drive Roll Kit ............................................................................................. 005-0244
For .030" (0.8mm) dia. aluminum wire.
Includes and insulated drive roll P/N 511-0089 and idler roll assy. P/N 003-1870.
Insulated Groove Drive Roll Kit ............................................................................................. 005-0245
For .035" (0.9mm) dia. aluminum wire.
Includes insulated drive roll P/N 511-0090 and idler roll assy. P/N 003-1870.
Insulated Groove Drive Roll Kit ............................................................................................. 005-0246
For .040" (1.0mm)dia. aluminum wire.
Includes insulated drive roll P/N 511-0091 and idler roll assy. P/N 003-1870.
Insulated Groove Drive Roll Kit ............................................................................................. 005-0247
For .045" (1.2mm) dia. aluminum wire.
Includes insulated drive roll P/N 511-0092 and idler roll assy. P/N 003-1870.
Insulated Groove Drive Roll Kit ............................................................................................. 005-0248
For .062" (1.6mm) dia. aluminum wire.
Includes insulated drive roll P/N 511-0093 and idler roll assy. P/N 003-1870.
Handle Kit - System III torch only......................................................................................... 005-0255
Includes right and left handles, trigger, pot nut, and knob and related hardware.
NOTE: Insulated drive roll kits are used to prevent preheating of the wire which may
soften it and clog the liner. This picking up of current at the drive rolls rather than at
the contact tip is usually not a problem usless using too large of a contact tip or
excessively oxidized aluminum wire.