MK Products Cobra System III Gooseneck - Manual (Page 5)

Cobra Gooseneck Owner's Manual - 8/96 Page 26
INTRODUCTION
Congratulations! You have just purchased the latest generation of the
popular Cobra System III Gooseneck Torch.
With the quest to be a Leader in Welding Technology this generation of Cobra
System III Gooseneck Torch is the best MK Products has ever developed.
Stronger gas and water tubes, motor and gearbox with enough torque and
speed to feed aluminum and flux core wires from .030 to 1/16, solid and hard
wires from .030 to .045. Matched up with any of MK’s Cobramatic wire feed
system is a combination that can not be beat.
This manual details the installation and operation of your Cobra System III
Gooseneck Torch. Properly installed, adjusted for your welding conditions, it
will be a reliable welding system producing consistently uniform welds.
Conduits for all MK torches (System III Gooseneck, Prince, and King) are
interchangeable. Some parts are interchangeable with existing Gooseneck
and Prince torches (contact tips, gas cups, drive and idler rolls). Consult
your owner’s manual for more information on your Cobra System III Gooseneck
torch.