MK Products Cobra System III Gooseneck - Manual (Page 12)

Cobra Gooseneck Owner's Manual - 8/96 Page 7
tighten when feeding wire.
C. Idler Roll Installation and Removal
1. Using a slot type screwdriver, loosen idler screw, taking care not to lose lock
washer under idler roll.
2. Insert new idler roll and lock washer onto screw, insuring that idler groove is
toward top and lock washer is beneath.
Figure 2
3. Tighten.
NOTE: Lock washer must be under idler roll or it will not turn freely.