Test drive – Mini Tec MTB2 Kit User Manual

Page 22

- Front Camber Setting = -0.5 to -1 Degree (Less for street driving, more for

racing)

Check List: For your safety, please check…

- That every suspension component

is fastened tightly.

- That the steering system is

fastened properly and all nuts and

bolts are secure.

- For a firm brake pedal.

- That the engine is stationary.

- All fluid levels are full.

- Tires are inflated properly.

- All lug nuts are tightened

Test Drive:

For your first test drive, go slow and easy to make sure that there are no problems.

Listen to the car as you drive it for odd noises. Drive the car easily for a few miles

and then go over the Check List again. After driving the car for 100 miles, check

front suspension alignment again.

Periodically, you will need to check all of your suspension components for wear.

After that, have fun!

Disclaimer of Warranty

Neither the seller nor the manufacturer will be liable for any loss, damage or injury directly or indirectly arising
from the use or inability to determine the use of this product.
Before using, the use shall determine the suitability of the products for its intended use, and the user should
assume full responsibility and risk in connection herewith.
For off road use only!