Microsens MS400941 - Manual (Page 3)

1
Overview
The Power over Ethernet Splitter splits data and power out, and outputs
Ethernet data and DC 5V/7.5V/9V/12V power to the network device that is
not compliant with IEEE802.3af standard. The network device can accept
the power and Ethernet data from the Splitter . The following figure shows
how the Power over Ethernet Splitter works.
Features
Standard
IEEE802.3 10BASE-T
IEEE802.3u 100BASE-TX
IEEE802.3ab Gigabit Ethernet
IEEE802.3af Power over Ethernet
Power jack diameter
5.5 x 2.0mm
5.5 x 2.5mm