Microsens MS400920 - Manual (Page 6)

4
Safety CE/EN60950-1
Hardware Description
The Power over Ethernet Injector has three connection ports and one LED
indicator. We will describe each in following.
 Data In port: It is an RJ-45 Ethernet interface port for data
transmitting into the PoE Injector. It is for connecting with the switch.
 Power In port: The Power In port is for supplying the power into the
Injector.
The Data In and Power in port figure
 Data Out port: It is an RJ-45 Ethernet port to connect with PoE
Splitter, or PD.
Data Out port figure
Package Contents
 One Power over Ethernet Injector
 User Manual
 Four Rubber Feet
 Power cord x 1, 1830mm