Microsens MS400920 - Manual (Page 5)

3
Features
The following table provides the technical specification of the Power over
Ethernet Injector.
Standard
IEEE802.3 10BASE-T
IEEE802.3u 100BASE-TX
IEEE802.3af
Connector
RJ-45 Data in/out: Data/signal pairs pin 1,2,3,6
RJ-45 Power out: power over spare wire pairs
pin: 4,5(V+) , 7,8(V-)
Network Cable
10BASE-T: UTP/STP Cat.3,4,5 cable
EIA/TIA-568 100-ohm(100m)
100BASE-TX: UTP/STP Cat.5 cable
EIA/TIA-568 100-ohm(100m)
LED System: power (green)
Power Consumption 19W
Power Supply AC 100 ~ 240V, 50~60Hz, 0.3A
Power Output DC [email protected]
Operating Temperature 0
o
C ~ 45
o
C
Operating Humidity 10% ~ 90% Humidity (non-condensing)
Storage Temperature -40
o
C ~ 70
o
C
Dimension 117mm x 60mm x 35mm (W x D x H)
EMI CE