Microsens MS400229 - Manual (Page 7)

10/100/100 TX to Gigabit Fiber Media Converter Page 7/7
MICROSENS GmbH & Co. KG · Kueferstraße 16 · 59067 Hamm / Germany · Tel. +49 (0) 23 81/94 52-0 · FAX -100 · www.microsens.com
Technnical Specifications
Standard IEEE802.3 10BASE-T
IEEE802.3u 100BASE-TX
IEEE 802.3ab 1000Base-T
IEEE 802.3z 1000Base-SX/LX standards
IEEE802.3x Flow Control and Back pressure
Connector RJ-45 Socket: CAT-5 (10/100/1000 Mbps) Twisted Pair
cable Auto MDI/MDI-X and Auto-Negotiation Function
Support
Fiber: MINI GBIC 3.3 V
Switch architecture Store and Forward
Fiber parameters Fiber Core: Multimode (62.5/125 μm, 50/125 μm),
Single mode (9/125 μm)
Wavelength: 850 nm (Multimode),
1310 nm (Single mode)
Fiber Distance: Depend on the transceiver type
Transparent packet 64 to 1536 Bytes for Ethernet packet
Link Lost Forward UTPFiber: If TX port link down, then converter will
forced fiber to link down
Fiber 
UTP: If Fiber port link down, the media con
verter will force TX port to link down.
DIP Switch DIP Switch 1: LLF enable/disable
DIP Switch 2: Converter mode selection
DIP Switch 3: reserved
LED Module: Power, TX (100/1000 Mbps, LK/ACT, FDX),
Fiber (LK/ACT, FDX)
Power Stand-alone (external adapter): DC 9 V / 0.7 A
Dimension 119 mm x 85 mm x 26 mm
EMI & safety CE
MICROSENS reserves the right to make any changes without further notice to any product to improve reliability, function
or design. MICROSENS does not assume any liability arising out of the application or use of any product. 3807 fr.