Microsens MS400229 - Manual (Page 4)

10/100/100 TX to Gigabit Fiber Media Converter Page 4/7
MICROSENS GmbH & Co. KG · Kueferstraße 16 · 59067 Hamm / Germany · Tel. +49 (0) 23 81/94 52-0 · FAX -100 · www.microsens.com
LED Indicators
There are 6 diagnostic LEDs located on the Front panel of converter module. They
provide real-time information of system and optional status. The following table
provides description of the LED status and their meanings.
LED Status Description
PWR Green Power on
SPD Green 1000 Mbps UTP Speed
Orange 100 Mbps UTP Speed
OFF 10 Mbps UTP Speed
LNK/ACT
(UTP)
Green The unit is linking with its link partner.
Blinks The unit is transmitting or receiving
packets from UTP devices.
Off No device attached
FDX (UTP) Orange The UTP port is operating in full-duplex
mode.
Off Half-duplex mode or no device attached
LNK/ACT
(Fiber)
Green The unit is linking with its link partner.
Blinks The unit is receiving packets from FX
devices.
Off No device attached
FDX (Fiber) Orange The fiber port is operating in full-duplex
mode.
Off Half-duplex mode or no device attached