beautypg.com

Description – Microsens MS400229 User Manual

Page 5

background image

10/100/100 TX to Gigabit Fiber Media Converter

Page 5/7

MICROSENS GmbH & Co. KG · Kueferstraße 16 · 59067 Hamm / Germany · Tel. +49 (0) 23 81/94 52-0 · FAX -100 · www.microsens.com

DIP-switch

The DIP-switch is used to configure operation mode for LLF (Link Lost Forwarding)
and operation mode for UTP/Fiber port. The default value of Dipswitch is OFF.

S/W No

Status

Description

1

ON

LLF Enable

OFF

LLF Disable

2

ON

Pure converter mode

OFF

Switch converter mode

3

ON

reserved

OFF

reserved

Link Lost Forwarding): When LLF is enable, allow UTP link failures to be reported to
the fiber side and also allow Fiber link failure to be reported to the UTP side. Therefore,
A link loss forward feature is provided in both UTP and Fiber side.

[Note] Please don’t change the DIP-switch setting when UTP or fiber port is
transmitting or receiving data. It may cause some data error.


Rear Panel

The rear panel contains a power socket. This power socket accepts DC9V voltage and
minimum 0.7A supplied current.

DC IN