Microsens MS655099 - Manual (Page 23)

19
Hardware Installation
In this paragraph, we will describe how to install the 5-port
10/100/1000Base-TX Industrial Switch converter and the installation points for
the attention.
Installation Steps
1. Unpacked the Industrial switch converter packing.
2. Check the DIN-Rail is screwed on the Industrial switch converter. If the
DIN-Rail is not screwed on the Industrial switch converter. Please refer to
DIN-Rail Mounting section for DIN-Rail installation. If you want to wall
mount the Industrial switch converter, then please refer to Wall Mount
Plate Mounting section for wall mount plate installation.
3. To hang the Industrial switch converter on the DIN-Rail track or wall,
please refer to the Mounting Installation section.