Microsens MS655020X - Manual (Page 8)

Ethernet VDSL2 Extender - manual Page 8/9
MICROSENS GmbH & Co. KG - Kueferstraße 16 - 59067 Hamm / Germany - Tel. +49 23 81/94 52-0 - FAX -100 - www.microsens.com
5. Check if the DIN-Rail is tightened on the track or not.
6. To remove the unit from the track, reverse steps above.
Wall Mount Plate Mounting
Follow the steps below to mount the unit with wall mount plate.
1.
Remove the DIN-Rail from the unit; loose the screws to remove the DIN-
Rail.
2.
Place the wall mount plate on the top & bottom side of the unit.
3. Use the screws to screw the wall mount plate on the unit.
4. Use the hook holes at the corners of the wall mount plate to hang the
unit on the wall.
5.
To remove the wall mount plate, reverse steps above.