Microsens MS655060-562P - Manual (Page 12)

9
Cabling
 Twisted-pair segment can be connected with unshielded twisted pair (UTP) or
shielded twisted pair (STP) cable. The cable must comply with the IEEE 802.3u
100Base TX standard for Category 5. The cable between the converter and the link
partner (switch, hub, workstation, etc.) must be less than 100 meters (328 ft.) long.
 Fiber segment using single-mode connector type must use 9/125µm single-mode
fiber cable. User can connect two devices in the distance up to 30 Kilometers.
 Fiber segment using multi-mode connector type must use 50 or 62.5/125 µm multi-
mode fiber cable. User can connect two devices up to 2Km distances.