Microsens MS655104 - Manual (Page 18)

14
2.3.2 DIN-rail Mounting
You can also mount 4 10/100TX + 2 or 1 100FX Industrial Switch on a standard DIN-
rail by below steps.
The DIN-rail kit is screwed on the industrial switch when out of factory. If the DIN-rail kit
is not screwed on the industrial switch, please screw the DIN-rail kit on the switch first.
First, hang the 4 10/100TX + 2 or 1 100FX Industrial Switch to the DIN-rail with angle
of inclination. See figure 2.6.
Figure 2.6: Installation to DIN-rail Step 1