Microsens MS655104 - Manual (Page 12)

8
Chapter 2 Installation
In this chapter, you will be given an overview of the 4 10/100TX + 2 or 1 100FX
Industrial Switch hardware installation procedures.
2.1 LED Indicators
There are few LEDs display the power status and network status located on the front
panel of 4 10/100TX + 2 or 1 100FX Industrial Switch, each of them has its own
specific meaning as below table.
Table 2.1: 4 10/100TX + 2 or 1 100FX Industrial Switch LED Definition
LED Color Description
P1 Green
On Power input 1 is active
Off Power input 1 is inactive
P2 Green
On Power input 2 is active
Off Power input 2 is inactive
P-Fail Red
On Power input 1 or 2 is inactive
Off Power input 1 and 2 are both active, or no power input
Link/Active
(1~6 for 2 x 100FX)
(1~5 for 1 x 100FX)
Green
On Connected to network
Flashing Networking is active
Off Not connected to network
Duplex/Collision
(1~4)
Orange
On Ethernet port full duplex
Flashing Collision of packets occurs
Off Ethernet port half duplex or not connect to network