Microsens MS655102/12x - Manual (Page 21)

19
Technical Specifications
The technical specifications of the Industrial Switch are listed as follows.
Communications
Compatibility IEEE 802.3, 802.3u, 802.3x
LAN 10/100Base-TX, 100FX
Transmission Distance Multi-Mode Fiber 2KM
(50/125μm ~ 62.5/125μm)
Single-Mode Fiber 30KM (9/125μm)
UTP/STP up to 100 meters
Transmission Speed Up to 100 Mbps
Broadcast Storm Rate Limit 200pps (100M), 20pps (10M)
Interface
Connectors 4 x RJ-45
1 x SC/ST type 100M fiber
(4 10/100TX + 1 100FX model)
2 x SC/ST type 100M fiber
(4 10/100TX + 2 100FX model)
6-pin captive screw terminal (power)
LED Indicators Unit: P1, P2, Fault
TX port: Link/Active, Duplex/Collision
Power
Power Consumption 4 10/100TX + 1 100FX model:
4.44W (standard)
4.2W (wide operating temp.)
4 10/100TX + 2 100FX model:
6.41W
Power Input 2 x Unregulated +12 ~ 48 V
DC
Relay Output 1 Relay Output